Datasheet

SAM4N Series [SUMMARY DATASHEET]

11158AS–ATARM–06-Jun-13

z Quartz or ceramic resonator oscillators: 3 to 20 MHz main power with Failure Detection and optional low

power 32.768 kHz for RTC or device clock

z High precision 8/12 MHz factory trimmed internal RC oscillator with 4 MHz default frequency for device

start-up. In-application trimming access for frequency adjustment

z Slow Clock Internal RC oscillator as permanent low-power mode device clock

z PLL up to 240 MHz for device clock

z Temperature Sensor

z Up to 23 peripheral DMA (PDC) channels

z Low Power Modes

z Sleep and Backup modes, down to 0.7 μA in Backup mode

z Low-power RTC

z Peripherals

z Up to 3 USARTs with ISO7816 , IrDA

(only USART0), RS-485, and SPI Mode

z Up to 4 2-wire UARTs

z Up to 3 Two Wire Interfaces (TWI)

z 1 SPI

z 2 Three-channel 16-bit Timer/Counter with capture, waveform, compare and PWM mode. Quadrature

Decoder Logic and 2-bit Gray Up/Down for Stepper Motor

z 1 Four-channel 16-bit PWM

z 32-bit Real-time Timer and RTC with calendar and alarm features

z I/Os

z Up to 79 I/O lines with external interrupt capability (edge or level sensitivity), debouncing, glitch filtering and

on-die Series Resistor Termination. Individually Programmable Open-drain, Pull-up and Pull-down resistor

and Synchronous Output

z Three 32-bit Parallel Input/Output Controllers

z Analog

z One 10-bit ADC up to 510 ksamples/sec, with Digital Averaging Function providing Enhanced Resolution

Mode up to 12-bit, Up to 16-channels

z One 10-bit DAC up to 1 MSamples/sec

z Internal voltage reference, 3V typ

z Packages

z 100-lead LQFP, 14 x 14 mm, pitch 0.5 mm/100-ball TFBGA, 9 x 9 mm, pitch 0.8 mm/100-ball VFBGA 7 x 7

mm, pitch 0.65 mm

z 64-lead LQFP, 10 x 10 mm, pitch 0.5 mm/64-pad QFN 9 x 9 mm, pitch 0.5 mm

z 48-lead LQFP, 7 x7 mm, pitch 0.5 mm/48-pad QFN 7 x 7 mm, pitch 0.5 mm