Datasheet

904
42023E–SAM–07/2013
ATSAM4L8/L4/L2
33.7 User Interface
Note: 1. The reset value is device specific. Refer to the Module Configuration section at the end of this chapter.
Table 33-2. DACC Register Memory Map
Offset Register Register Name Access Reset
0x00 Control Register CR Write-only –
0x04 Mode Register MR Read-write 0x00000000
0x08 Conversion Data Register CDR Write-only 0x00000000
0x0C Interrupt Enable Register IER Write-only –
0x10 Interrupt Disable Register IDR Write-only –
0x14 Interrupt Mask Register IMR Read-only 0x00000000
0x18 Interrupt Status Register ISR Read-only 0x00000000
0xE4 Write Protect Mode register WPMR Read-write 0x00000000
0xE8 Write Protect Status register WPSR Read-only 0x00000000
0xFC Version Register VERSION Read-only 0x-
(1)