Datasheet

656
42023E–SAM–07/2013
ATSAM4L8/L4/L2
25.7 User Interface
Note: 1. The reset values for these registers are device specific. Refer to the Module Configuration section at the end of this chapter.
Table 25-2. PICOUART Register Memory Map
Offset Register Register Name Access Reset
0x00 Control Register CR Write-only 0x00000000
0x04 Configuration Register CFG Read/Write 0x00000000
0x08 Status Register SR Read-only 0x00000000
0x0C Receive Holding Register RHR Read 0x00000000
0x20 Version Register VERSION Read-only -
(1)