Datasheet

233
42023E–SAM–07/2013
ATSAM4L8/L4/L2
13.7.11 DFLLx Value Register
Name: DFLLxVAL
Access Type: Read/Write
Reset Value: 0x00000000
• COARSE: Coarse Value
Set the value of the coarse calibration register. In closed loop mode, this field is read-only.
• FINE: Fine value
Set the value of the fine calibration register. In closed loop mode, this field is read-only.
Note that this register is protected by a lock. To write to this register the UNLOCK register has to be written first. Refer to
Section 13.7.7 ”Unlock Register” on page 228 for details.
31 30 29 28 27 26 25 24
-
--
-
--
--
23 22 21 20 19 18 17 16
--- COARSE
15 14 13 12 11 10 9 8
--
-----
-
76543210
FINE