Datasheet

42023E–SAM–07/2013

ATSAM4L8/L4/L2

Note: 1. The reset value is device specific. Refer to the Module Configuration section at the end of this chapter.

2. The reset value of this register depends on factory calibration.

0x0090 Generic Clock Control7 GCCTRL7 Read/Write 0x00000000

0x0094 Generic Clock Control8 GCCTRL8 Read/Write 0x00000000

0x0098 Generic Clock Control9 GCCTRL9 Read/Write 0x00000000

0x009C Generic Clock Control10 GCCTRL10 Read/Write 0x00000000

0x00A0 Generic Clock Control11 GCCTRL11 Read/Write 0x00000000

0x03D8 4/8/12MHz RC Oscillator Version Register RCFASTVERSION Read-only -

(1)

0x03DC Generic Clock Prescaler Version Register GCLKPRESCVERSION Read-only -

(1)

0x03E0 PLL Version Register PLLIFAVERSION Read-only -

(1)

0x03E4 Oscillator0 Version Register OSCIFAVERSION Read-only -

(1)

0x03E8 DFLL Version Register DFLLIFBVERSION Read-only -

(1)

0x03EC System RC Oscillator Version Register RCOSCIFAVERSION Read-only -

(1)

0x03F4 80MHz RC Oscillator Version Register RC80MVERSION Read-only -

(1)

0x03F8 Generic Clock Version Register GCLKVERSION Read-only -

(1)

0x03FC SCIF Version Register VERSION Read-only -

(1)

Table 13-3. SCIF Register Memory Map

Offset Register Register Name Access Reset