Datasheet

2
42023E–SAM–07/2013
ATSAM4L8/L4/L2
Digital Frequency Locked Loop (DFLL) with wide input range
Up to 16 peripheral DMA (PDCA) channels
Peripherals
USB 2.0 Device and Embedded Host: 12 Mbps, up to 8 bidirectional Endpoints and Multi-packet Ping-pong Mode. On-
Chip Transceiver
Liquid Crystal Display (LCD) Module with Capacity up to 40 Segments and up to 4 Common Terminals
One USART with ISO7816, IrDA®, RS-485, SPI, Manchester and LIN Mode
Three USART with SPI Mode
One PicoUART for extended UART wake-up capabilities in all sleep modes
Windowed Watchdog Timer (WDT)
Asynchronous Timer (AST) with Real-time Clock Capability, Counter or Calendar Mode Supported
Frequency Meter (FREQM) for Accurate Measuring of Clock Frequency
Six 16-bit Timer/Counter (TC) Channels with capture, waveform, compare and PWM mode
One Master/Slave Serial Peripheral Interface (SPI) with Chip Select Signals
Four Master and Two Slave Two-wire Interfaces (TWI), up to 3.4Mbit/s I
2
C-compatible
One Advanced Encryption System (AES) with 128-bit key length
One 16-channel ADC 300Ksps (ADC) with up to 12 Bits Resolution
One DAC 500Ksps (DACC) with up to 10 Bits Resolution
Four Analog Comparators (ACIFC) with Optional Window Detection
Capacitive Touch Module (CATB) supporting up to 32 buttons
Audio Bitstream DAC (ABDACB) Suitable for Stereo Audio
Inter-IC Sound (IISC) Controller, Compliant with Inter-IC Sound (I
2
S) Specification
Peripheral Event System for Direct Peripheral to Peripheral Communication
32-bit Cyclic Redundancy Check Calculation Unit (CRCCU)
Random generator (TRNG)
Parallel Capture Module (PARC)
Glue Logic Controller (GLOC)
I/O
Up to 75 I/O lines with external interrupt capability (edge or level sensitivity), debouncing, glitch filtering and slew-rate
control
Up to Six High-drive I/O Pins
Single 1.68-3.6V Power Supply
Packages
100-lead LQFP, 14 x 14 mm, pitch 0.5 mm/100-ball VFBGA, 7x7 mm, pitch 0.65 mm
64-lead LQFP, 10 x 10 mm, pitch 0.5 mm/64-pad QFN 9x9 mm, pitch 0.5 mm
64-ball WLCSP, 4,314x4,434 mm, pitch 0.5 mm
48-lead LQFP, 7 x 7 mm, pitch 0.5 mm/48-pad QFN 7x7 mm, pitch 0.5 mm