Datasheet

1010
42023E–SAM–07/2013
ATSAM4L8/L4/L2
• SMTRG:Sequencer missed trigger event
This bit is set when a sequencer trigger event is missed
This bit is cleared when the corresponding bit in SCR is written to one
• WM:Window monitor
This bit is set when the watched result value goes to the defined window
This bit is cleared when the corresponding bit in SCR is written to one
• LOVR:Sequencer last converted value overrun
This bit is set when an overrun error occurs on the LCV register
This bit is cleared when the corresponding bit in SCR is written to one
• SEOC:Sequencer end of conversion
This bit is set when an end of conversion occurs
This bit is cleared when the corresponding bit in SCR is written to one