Datasheet

1004
42023E–SAM–07/2013
ATSAM4L8/L4/L2
38.7 User Interface
Note: 1. The reset value for this register is device specific. Refer to the Module Configuration section at the end of this chapter.
Table 38-5. ADCIFE Register Memory Map
Offset Register
Register
Name Access Reset
0x0000 Control Register CR Write-Only 0x00000000
0x0004 Configuration Register CFG Read/Write 0x00000000
0x0008 Status Register SR Read-Only 0x00000000
0x000C Status Clear Register SCR Write-Only 0x00000000
0x0014 Sequencer Configuration Register SEQCFG Read/Write 0x00000000
0x0018 Configuration Direct Memory Access Register CDMA Write-Only 0x00000000
0x001C Timing Configuration Register TIM Read/Write 0x00000000
0x0020 Internal Timer Register ITIMER Read/Write 0x00000000
0x0024 Window Monitor Configuration Register WCFG Read/Write 0x00000000
0x0028 Window Monitor Threshold Configuration Register WTH Read/Write 0x00000000
0x002C Sequencer Last Converted Value Register LCV Read-Only 0x00000000
0x0030 Interrupt Enable Register IER Write-Only 0x00000000
0x0034 Interrupt Disable Register IDR Write-Only 0x00000000
0x0038 Interrupt Mask Register IMR Read-Only 0x00000000
0x003C Calibration Register CALIB Read/Write 0x00000000
0x0040 Version Register VERSION Read-Only -
(1)
0x0044 Parameter Register PARAMETER Read-Only -
(1)