Datasheet

20
SAM4E [SUMMARY DATASHEET]
11157CS–ATARM–25-Jul-13
Revision History
In the tables that follow, the most recent version of the document is referenced first.
“rfo” indicates changes requested during the document review and approval loop.
Doc. Rev Comments Change
Request
Ref.
11157CS
Introduction
In “Features” :
- added information on Two-wire Interface in Peripherals section and Wake-on-LAN for EMAC
- changed operating temperature range to 105°C
Updated Table 1-1 “Configuration Summary” with TWI informationIn Section 4. “Package and Pinout”,
added the FFPI signals to Table 4-1 “SAM4E 100-ball TFBGA Pinout”, Table 4-2 “SAM4E 144-ball LFBGA
Pinout”, Table 4-3 “SAM4E 100-lead LQFP Pinout” and Table 4-4 “SAM4E 144-lead LQFP Pinout”.
Removed Section 7. “Processor and Architecture”. Renumbered sections.
Removed Sections 11-4 to 11-16.
Table 5-1, “Ordering Codes for SAM4E Devices” updated with new ordering codes for parts at 105°C and
for tape & reel
rfo
8992
9045
rfo
rfo
rfo
Doc. Rev Comments Change
Request
Ref.
11157BS
Updated the document structure and added references to 100-ball TFBGA and 100-lead LQFP packages in:
- Section 1. “Features”
- Table 1-1 “Configuration Summary”
- Figure 2-1 “SAM4E 100-pin Block Diagram”
- Section 4.1 “100-ball TFBGA Package and Pinout”
- Section 4.3 “100-lead LQFP Package and Pinout”
- Section 5.1 “100-ball TFBGA Package Drawing”
- Section 5.3 “100-lead LQFP Package Drawing”
- Table 5-1 “Ordering Codes for SAM4E Devices”
Updated the figure title and added Analog Comparator (ACC) and Reinforced Safety Watchdog Timer
(RSWDT) blocks in Figure 2-2 “SAM4E 144-pin Block Diagram”.
Removed “AT91SAM” from the document title.
Replaced “Cortex™” references with “Cortex
®
“ in “Description” and further on in the entire document.
Removed package dimension references in Section 4. “Package and Pinout”.
8580
8605/rfo
rfo
rfo
Doc. Rev Comments Change
Request
Ref.
11157AS Initial release.