Datasheet
879
SAM4E [DATASHEET]
Atmel-11157D-ATARM-SAM4E16-SAM4E8-Datasheet_12-Jun-14
37.6.6 UART Status Register
Name: UART_SR
Address: 0x400E0614 (0), 0x40060614 (1)
Access: Read-only
RXRDY: Receiver Ready
0: No character has been received since the last read of the UART_RHR, or the receiver is disabled.
1: At least one complete character has been received, transferred to UART_RHR and not yet read.
TXRDY: Transmitter Ready
0: A character has been written to UART_THR and not yet transferred to the internal shift register, or the transmitter is
disabled.
1: There is no character written to UART_THR not yet transferred to the internal shift register.
ENDRX: End of Receiver Transfer
0: The end of transfer signal from the receiver Peripheral Data Controller channel is inactive.
1: The end of transfer signal from the receiver Peripheral Data Controller channel is active.
ENDTX: End of Transmitter Transfer
0: The end of transfer signal from the transmitter Peripheral Data Controller channel is inactive.
1: The end of transfer signal from the transmitter Peripheral Data Controller channel is active.
OVRE: Overrun Error
0: No overrun error has occurred since the last RSTSTA.
1: At least one overrun error has occurred since the last RSTSTA.
FRAME: Framing Error
0: No framing error has occurred since the last RSTSTA.
1: At least one framing error has occurred since the last RSTSTA.
PARE: Parity Error
0: No parity error has occurred since the last RSTSTA.
1: At least one parity error has occurred since the last RSTSTA.
31 302928 27 26 25 24
––––––––
23 22 21 20 19 18 17 16
––––––––
15 14 13 12 11 10 9 8
– – – RXBUFF TXBUFE – TXEMPTY –
76543 210
PARE FRAME OVRE ENDTX ENDRX – TXRDY RXRDY