Datasheet

SAM4E [DATASHEET]

Atmel-11157D-ATARM-SAM4E16-SAM4E8-Datasheet_12-Jun-14

12.6 Cortex-M4 Instruction Set

12.6.1 Instruction Set Summary

The processor implements a version of the Thumb instruction set. Table 12-13 lists the supported instructions.

 Angle brackets, <>, enclose alternative forms of the operand

 Braces, {}, enclose optional operands

 The Operands column is not exhaustive

 Op2 is a flexible second operand that can be either a register or a constant

 Most instructions can use an optional condition code suffix.

For more information on the instructions and operands, see the instruction descriptions.

Table 12-13. Cortex-M4 Instructions

Mnemonic Operands Description Flags

ADC, ADCS {Rd,} Rn, Op2 Add with Carry N,Z,C,V

ADD, ADDS {Rd,} Rn, Op2 Add N,Z,C,V

ADD, ADDW {Rd,} Rn, #imm12 Add N,Z,C,V

ADR Rd, label Load PC-relative address –

AND, ANDS {Rd,} Rn, Op2 Logical AND N,Z,C

ASR, ASRS Rd, Rm, <Rs|#n> Arithmetic Shift Right N,Z,C

B label Branch –

BFC Rd, #lsb, #width Bit Field Clear –

BFI Rd, Rn, #lsb, #width Bit Field Insert –

BIC, BICS {Rd,} Rn, Op2 Bit Clear N,Z,C

BKPT #imm Breakpoint –

BL label Branch with Link –

BLX Rm Branch indirect with Link –

BX Rm Branch indirect –

CBNZ Rn, label Compare and Branch if Non Zero –

CBZ Rn, label Compare and Branch if Zero –

CLREX – Clear Exclusive –

CLZ Rd, Rm Count leading zeros –

CMN Rn, Op2 Compare Negative N,Z,C,V

CMP Rn, Op2 Compare N,Z,C,V

CPSID i Change Processor State, Disable Interrupts –

CPSIE i Change Processor State, Enable Interrupts –

DMB – Data Memory Barrier –

DSB – Data Synchronization Barrier –

EOR, EORS {Rd,} Rn, Op2 Exclusive OR N,Z,C

ISB – Instruction Synchronization Barrier –

IT – If-Then condition block –

LDM Rn{!}, reglist Load Multiple registers, increment after –