Datasheet

503
SAM4E [DATASHEET]
Atmel-11157D-ATARM-SAM4E16-SAM4E8-Datasheet_12-Jun-14
 DST_INCR: Incrementing, Decrementing or Fixed Address for the Destination
 IEN: Interrupt Enable Not
0: When the buffer transfer is completed, the BTCx flag is set in the EBCISR status register. This bit is active low.
1: When the buffer transfer is completed, the BTCx flag is not set.
If this bit is cleared, when the buffer transfer is completed, the BTCx flag is set in the EBCISR status register.
Value Name Description
00 INCREMENTING The destination address is incremented
01 DECREMENTING The destination address is decremented
10 FIXED The destination address remains unchanged