Datasheet
SAM4E [DATASHEET]
Atmel-11157D-ATARM-SAM4E16-SAM4E8-Datasheet_12-Jun-14
388
19.5.7 Supply Controller Wake-up Inputs Register
Name: SUPC_WUIR
Address: 0x400E1820
Access: Read/Write
This register is located in the VDDIO domain.
This register can only be written if the WPEN bit is cleared in the System Controller Write Protection Mode Register
(SYSC_MR).
WKUPEN0 - WKUPEN15: Wake-up Input Enable 0 to 15
0 (DISABLE): The corresponding wake-up input has no wake-up effect.
1 (ENABLE): The corresponding wake-up input forces the wake-up of the core power supply.
WKUPT0 - WKUPT15: Wake-up Input Type 0 to 15
0 (LOW): A low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the
core power supply.
1 (HIGH): A high level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the
core power supply.
31 30 29 28 27 26 25 24
WKUPT15 WKUPT14 WKUPT13 WKUPT12 WKUPT11 WKUPT10 WKUPT9 WKUPT8
23 22 21 20 19 18 17 16
WKUPT7 WKUPT6 WKUPT5 WKUPT4 WKUPT3 WKUPT2 WKUPT1 WKUPT0
15 14 13 12 11 10 9 8
WKUPEN15 WKUPEN14 WKUPEN13 WKUPEN12 WKUPEN11 WKUPEN10 WKUPEN9 WKUPEN8
76543210
WKUPEN7 WKUPEN6 WKUPEN5 WKUPEN4 WKUPEN3 WKUPEN2 WKUPEN1 WKUPEN0