Datasheet
1497
SAM4E [DATASHEET]
Atmel-11157D-ATARM-SAM4E16-SAM4E8-Datasheet_12-Jun-14
S
25-Apr-2013
Replaced “RES = 1” with “RES = 0” in Table 46-30 “ADC Resolution following Digital Averaging”.
Updated Table 46-33 “Gain and Error Offset, 12-bit Mode, VDDIN 2.4V to 3.6V Supply Voltage Conditions”.
Section 46.7.1.2 “Conditions @ 25 degrees with Gain =4”, replaced “f
S
= 1 kHz” with “f
S
= 1 MHz”.
Section 46.11.3.2 “SPI Timings”, updated for better presentation the paragraph “Note that in SPI master mode,...”.
Updated notes in Table 46-52 “SMC Write NCS Controlled (WRITE_MODE = 0)” and in Table 46-57 “EMAC MII Timings”.
Section 46.8 “12-bit DAC Characteristics”, updated data in Table 46-41 “Static Performance Characteristics” and Table
46-42 “Dynamic Performance Characteristics”.
Updated data in Table 46-62 “AC Flash Characteristics”.
Mechanical Characteristics:
Updated the section structure and added references on 100-ball TFBGA and 100-lead LQFP packages in:
- Section 47.1 “100-ball TFBGA Package Drawing”
- Section 47.3 “100-lead LQFP Package Drawing”
Ordering Codes:
Added references to 100-ball TFBGA and 100-lead LQFP packages in Table 48-1 “Ordering Codes for SAM4E Devices”.
Table 52-4. SAM4E Datasheet Rev. 11157A 14-Jan-2013 Revision History
Doc. Date Changes
14-Jan-2013 Initial release
Table 52-3. SAM4E Datasheet Rev. 11157B 25-April-2013 Revision History (Continued)
Doc. Date Changes