Datasheet

1425
SAM4E [DATASHEET]
Atmel-11157D-ATARM-SAM4E16-SAM4E8-Datasheet_12-Jun-14
47.3.2.2 Wait Mode
Figure 47-7. Measurement Setup for Wait Mode
 V
VDDIO
= V
VDDIN
= 3.6V
 Core Clock and Master Clock stopped
 Current measurement as shown in the above figure
 All peripheral clocks deactivated
 BOD disabled
 RTT enabled
Table 47-12 gives current consumption in typical conditions.
Note: 1. Value from characterization, not tested in production.
10.220.25mA
0.5 0.18 0.21 mA
0.25 0.16 0.19 mA
Table 47-11. Sleep Mode Current Consumption versus Master Clock (MCK) Variation with FAST RC
Core Clock/MCK (MHz)
VDDCORE Consumption
(AMP1)
Total Consumption
(AMP2) Unit
Table 47-12. Typical Current Consumption in Wait Mode
(1)
Wait Mode
Consumption
Typical Value
Unit
@25°C @85°C @105°C
Conditions
VDDOUT
Consumption
(AMP1)
Total
Consumption
(AMP2)
Total
Consumption
(AMP2)
Total
Consumption
(AMP2)
See Figure 47-7 on page 1425
There is no activity on the I/Os of the
device. With the Flash in Standby
mode
43 56 550 1200
µA
See Figure 47-7 on page 1425
There is no activity on the I/Os of the
device. With the Flash in Deep Power
Down Mode
39 47 496 980
VDDIO
VDDOUT
VDDCORE
VDDIN
Voltage
Regulator
VDDPLL
3.6V
AMP1
AMP2