Datasheet

1139
SAM4E [DATASHEET]
Atmel-11157D-ATARM-SAM4E16-SAM4E8-Datasheet_12-Jun-14
41.14.13 HSMCI Interrupt Enable Register
Name: HSMCI_IER
Address: 0x40080044
Access: Write-only
The following configuration values are valid for all listed bit names of this register:
0: No effect.
1: Enables the corresponding interrupt.
 CMDRDY: Command Ready Interrupt Enable
 RXRDY: Receiver Ready Interrupt Enable
 TXRDY: Transmit Ready Interrupt Enable
 BLKE: Data Block Ended Interrupt Enable
 DTIP: Data Transfer in Progress Interrupt Enable
 NOTBUSY: Data Not Busy Interrupt Enable
 ENDRX: End of Receive Buffer Interrupt Enable
 ENDTX: End of Transmit Buffer Interrupt Enable
 SDIOIRQA: SDIO Interrupt for Slot A Interrupt Enable
 SDIOWAIT: SDIO Read Wait Operation Status Interrupt Enable
 CSRCV: Completion Signal Received Interrupt Enable
 RXBUFF: Receive Buffer Full Interrupt Enable
 TXBUFE: Transmit Buffer Empty Interrupt Enable
 RINDE: Response Index Error Interrupt Enable
 RDIRE: Response Direction Error Interrupt Enable
 RCRCE: Response CRC Error Interrupt Enable
31 30 29 28 27 26 25 24
UNRE OVRE ACKRCVE ACKRCV XFRDONE FIFOEMPTY – –
23 22 21 20 19 18 17 16
CSTOE DTOE DCRCE RTOE RENDE RCRCE RDIRE RINDE
15 14 13 12 11 10 9 8
TXBUFE RXBUFF CSRCV SDIOWAIT – – – SDIOIRQA
76543210
ENDTX ENDRX NOTBUSY DTIP BLKE TXRDY RXRDY CMDRDY