Datasheet

371
11011B–ATARM–21-Feb-12
SAM3N
24.15.16 PMC Fast Startup Mode Register
Name: PMC_FSMR
Address: 0x400E0470
Access: Read-write
This register can only be written if the WPEN bit is cleared in “PMC Write Protect Mode Register” on page 374.
• FSTT0 - FSTT15: Fast Startup Input Enable 0 to 15
0 = The corresponding wake up input has no effect on the Power Management Controller.
1 = The corresponding wake up input enables a fast restart signal to the Power Management Controller.
• RTTAL: RTT Alarm Enable
0 = The RTT alarm has no effect on the Power Management Controller.
1 = The RTT alarm enables a fast restart signal to the Power Management Controller.
• RTCAL: RTC Alarm Enable
0 = The RTC alarm has no effect on the Power Management Controller.
1 = The RTC alarm enables a fast restart signal to the Power Management Controller.
• LPM: Low Power Mode
0 = The WaitForInterrupt (WFI) or WaitForEvent (WFE) instruction of the processor causes the processor to enter Idle
Mode.
1 = The WaitForEvent (WFE) instruction of the processor causes the system to enter Wait Mode.
31 30 29 28 27 26 25 24
––––––––
23 22 21 20 19 18 17 16
–––LPM––RTCALRTTAL
15 14 13 12 11 10 9 8
FSTT15 FSTT14 FSTT13 FSTT12 FSTT11 FSTT10 FSTT9 FSTT8
76543210
FSTT7 FSTT6 FSTT5 FSTT4 FSTT3 FSTT2 FSTT1 FSTT0