Datasheet

167
11011B–ATARM–21-Feb-12
SAM3N
10.21.4 Interrupt Control and State Register
The ICSR:
• provides:
– set-pending and clear-pending bits for the PendSV and SysTick exceptions
• indicates:
– the exception number of the exception being processed
– whether there are preempted active exceptions
– the exception number of the highest priority pending exception
– whether any interrupts are pending.
See the register summary in Table 10-30 on page 164, and the Type descriptions in Table 10-33
on page 191, for the ICSR attributes. The bit assignments are:
• PENDSVSET
RW
PendSV set-pending bit.
Write:
0 = no effect
1 = changes PendSV exception state to pending.
Read:
0 = PendSV exception is not pending
1 = PendSV exception is pending.
Writing 1 to this bit is the only way to set the PendSV exception state to pending.
• PENDSVCLR
WO
PendSV clear-pending bit.
Write:
0 = no effect
1 = removes the pending state from the PendSV exception.
31 30 29 28 27 26 25 24
Reserved Reserved PENDSVSET PENDSVCLR PENDSTSET PENDSTCLR Reserved
23 22 21 20 19 18 17 16
Reserved for
Debug
ISRPENDING VECTPENDING
15 14 13 12 11 10 9 8
VECTPENDING RETTOBASE Reserved VECTACTIVE
76543210
VECTACTIVE