Datasheet

52
ATmega8A [DATASHEET]
8159E–AVR–02/2013
When reading back a software assigned pin value, a nop instruction must be inserted as indicated in Figure 13-4.
The out instruction sets the “SYNC LATCH” signal at the positive edge of the clock. In this case, the delay t
pd
through the synchronizer is 1 system clock period.
Figure 13-4. Synchronization when Reading a Software Assigned Pin Value
out PORTx, r16 nop in r17, PINx
0xFF
0x00 0xFF
SYSTEM CLK
r16
INSTRUCTIONS
SYNC LATCH
PINxn
r17
t
pd