Datasheet

895
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [DATASHEET]
8284E–AVR–02/2013
38. Datasheet revision history
Please note that the referring page numbers in this section are referring to this document.The referring revision in
this section are referring to the document revision.
38.1 Rev. 8284E - 02/2013
38.2 Rev. 8284D - 06/11
38.3 Rev. 8284C - 06/11
38.4 Rev. 8284B - 03/11
1. New template
2. Countless, small corrections made throughout the whole document
3. In Section ”System and reset characteristics” on page 334 the sentence “The following chara apply only
to...” has been deleted
4. Fo r me r Section 29.6 on page 334 (“Power-on reset”), subsection 29.6.1
(“ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490PA revision C and later”) and
subsection 29.6.2 (“ATmega329A/329PA/3290A/3290PA/649A/649P/6490A/6490PA revision A and B”)
have been deleted
5. The maximum limits for “Power Supply Current” in Table 29-9 on page 330 have been corrected
6. The maximum limits for “Power Supply Current” in Table 29-11 on page 331 have been corrected
7. Added ”Electrical Characteristics – TA = -40°C to 105°C” on page 339.
8. Added ”Typical Characteristics – TA = -40°C to 105°C” on page 661.
9. Updated ”Ordering information” on page 878
1. Removed “Preliminary” from the front page
2. Updated the Table 29-16 on page 344. V
POT
falling / Min. is 0.05V, not 0.5V
1. Updated ”Signature Bytes” on page 296. A, P, and PA devices have different signature (0x002) bytes.
2. Updated all ”DC Characteristics” on page 325.
1. Updated the datasheet according to the Atmel new Brand Style Guide.
2. Updated all ”Ordering information” on page 878.
3. Updated ”Packaging Information” on page 888.