Datasheet

81
ATmega169A/PA/329A/PA/649A/P/3290A/PA/6490A/P [DATASHEET]
8284E–AVR–02/2013
AIN0 – Analog Comparator Positive input. This pin is directly connected to the positive input of the Analog
Comparator.
PCINT2, Pin Change Interrupt Source 2: The PE2 pin can serve as an external interrupt source.
• TXD/PCINT1 – Port E, Bit 1
TXD0, UART0 Transmit pin.
PCINT1, Pin Change Interrupt Source 1: The PE1 pin can serve as an external interrupt source.
• RXD/PCINT0 – Port E, Bit 0
RXD, USART0 Receive pin. Receive Data (Data input pin for the USART0). When the USART0 Receiver is
enabled this pin is configured as an input regardless of the value of DDE0. When the USART0 forces this pin to be
an input, a logical one in PORTE0 will turn on the internal pull-up.
PCINT0, Pin Change Interrupt Source 0: The PE0 pin can serve as an external interrupt source.
Table 14-16 and Table 14-17 relates the alternate functions of Port E to the overriding signals shown in Figure 14-
5 on page 71.
Note: 1. CKOUT is one if the CKOUT Fuse is programmed.
Table 14-16. Overriding signals for alternate functions PE7:PE4.
Signal name PE7/PCINT7
PE6/DO/
PCINT6
PE5/DI/SDA/
PCINT5
PE4/USCK/SCL/
PCINT4
PUOE 0 0 USI_TWO-WIREUSI_TWO-WIRE
PUOV0000
DDOE CKOUT
(1)
0 USI_TWO-WIRE USI_TWO-WIRE
DDOV 1 0
(SDA + PORTE5) •
DDE5
(USI_SCL_HOLD
+ PORTE4
) •
DDE4
PVOE CKOUT
(1)
USI_THREE-
WIRE
USI_TWO-WIRE •
DDE5
USI_TWO-WIRE •
DDE4
PVOV clk
I/O
DO 0 0
PTOE––0USITC
DIEOE PCINT7 • PCIE0 PCINT6 • PCIE0
(PCINT5 • PCIE0)
+ USISIE
(PCINT4 • PCIE0)
+ USISIE
DIEOV1111
DI PCINT7 INPUT PCINT6 INPUT
DI/SDA INPUT
PCINT5 INPUT
USCKL/SCL
INPUT
PCINT4 INPUT
AIO––––