Data Sheet

320
ATmega48A/PA/88A/PA/168A/PA/328/P [DATASHEET]
Atmel-8271H-AVR- ATmega-Datasheet_08/2014
30.2.2 ATmega88PA DC Characteristics – Current Consumption
Notes: 1. Results obtained using external clock and methods described in ”Minimizing Power Consumption” on page 43. Power reduction fully enabled (PRR = 0xFF)
and with no I/O drive.
2. Typical values at 25°C. Maximum values are test limits in production
3. The current consumption values include input leakage current
30.2.3 ATmega168P DC Characteristics – Current Consumption
Notes: 1. Results obtained using external clock and methods described in ”Minimizing Power Consumption” on page 43. Power reduction fully enabled (PRR = 0xFF)
and with no I/O drive.
2. Typical values at 25C. Maximum values are test limits in production
3. The current consumption values include input leakage current
4. Maximum values are characterized values and not test limits in production
Symbol Parameter Condition Min. Typ.
(2)
Max. Units
I
CC
Power Supply Current
(1)
Active 1MHz, V
CC
= 2V 0.2 0.6
mA
Active 4MHz, V
CC
= 3V 1.2 2.75
Active 8MHz, V
CC
= 5V 4.1 10
Idle 1MHz, V
CC
= 2V 0.03 0.17
Idle 4MHz, V
CC
= 3V 0.18 0.8
Idle 8MHz, V
CC
= 5V 0.8 3
Power-save mode
(3)
32kHz TOSC enabled, V
CC
=1.8V 0.8
µA
32kHz TOSC enabled, V
CC
= 3V 0.9
Power-down mode
(3)
WDT enabled, V
CC
= 3V 3.9 8.8
WDT disabled, V
CC
= 3V 0.1 4
Symbol Parameter Condition Min. Typ.
(2)
Max. Units
I
CC
Power Supply Current
(1)
Active 1MHz, V
CC
= 2V 0.3 0.6
mA
Active 4MHz, V
CC
= 3V 1.8 2.75
Active 8MHz, V
CC
= 5V 6.7 10
Idle 1MHz, V
CC
= 2V 0.06 0.2
Idle 4MHz, V
CC
= 3V 0.4 0.8
Idle 8MHz, V
CC
= 5V 1.7 3
Power-save mode
(3)(4)
32kHz TOSC enabled, V
CC
= 1.8V 0.8 2.2
µA
32kHz TOSC enabled, V
CC
= 3V 0.9 2.9
Power-down mode
(3)
WDT enabled, V
CC
= 3V 4.6 8.8
WDT disabled, V
CC
= 3V 0.1 2.2