Data Sheet

307
ATmega48A/PA/88A/PA/168A/PA/328/P [DATASHEET]
Atmel-8271H-AVR- ATmega-Datasheet_08/2014
29.2.8 ATmega328P DC Characteristics
Notes: 1. Values with “Minimizing Power Consumption” enabled (0xFF).
2. Typical values at 25C. Maximum values are test limits in production.
3. The current consumption values include input leakage current.
Notes: 1. Values with “Minimizing Power Consumption” enabled (0xFF).
2. Typical values at 25C. Maximum values are test limits in production.
3. The current consumption values include input leakage current.
29.3 Speed Grades
Maximum frequency is dependent on V
CC.
As shown in Figure 29-1, the Maximum Frequency vs. V
CC
curve is
linear between 1.8V < V
CC
< 2.7V and between 2.7V < V
CC
< 4.5V.
Table 29-12. ATmega328P DC characteristics - T
A
= -40C to 85C, V
CC
= 1.8V to 5.5V (unless otherwise noted)
Symbol Parameter Condition Min. Typ.
(2)
Max. Units
I
CC
Power Supply Current
(1)
Active 1MHz, V
CC
= 2V 0.3 0.5
mA
Active 4MHz, V
CC
= 3V 1.7 2.5
Active 8MHz, V
CC
= 5V 5.2 9
Idle 1MHz, V
CC
= 2V 0.04 0.15
Idle 4MHz, V
CC
= 3V 0.3 0.7
Idle 8MHz, V
CC
= 5V 1.2 2.7
Power-save mode
(3)
32kHz TOSC enabled, V
CC
= 1.8V 0.8
µA
32kHz TOSC enabled, V
CC
= 3V 0.9
Power-down mode
(3)
WDT enabled, V
CC
= 3V 4.2 8
WDT disabled, V
CC
= 3V 0.1 2
Table 29-13. ATmega328P DC characteristics - T
A
= -40C to 105C, V
CC
= 1.8V to 5.5V (unless otherwise noted)
Symbol Parameter Condition Min. Typ.
(2)
Max. Units
I
CC
Power Supply Current
(1)
Active 1MHz, V
CC
= 2V 0.3 0.5
mA
Active 4MHz, V
CC
= 3V 1.7 2.5
Active 8MHz, V
CC
= 5V 5.2 9.0
Idle 1MHz, V
CC
= 2V 0.04 0.15
Idle 4MHz, V
CC
= 3V 0.3 0.7
Idle 8MHz, V
CC
= 5V 1.2 2.7
Power-save mode
(3)
32kHz TOSC enabled, V
CC
= 1.8V 0.8
µA
32kHz TOSC enabled, V
CC
= 3V 0.9
Power-down mode
(3)
WDT enabled, V
CC
= 3V 4.2 10
WDT disabled, V
CC
= 3V 0.1 5