Datasheet
Table Of Contents
- 1. Pin Configurations
- 2. Overview
- 2.1 Block Diagram
- 2.2 Comparison Between ATmega169A/169PA/329A/329PA/649A/649P/3290A/3290PA/6490A/6490P
- 2.3 Pin Descriptions
- 2.3.1 VCC
- 2.3.2 GND
- 2.3.3 Port A (PA7...PA0)
- 2.3.4 Port B (PB7...PB0)
- 2.3.5 Port C (PC7...PC0)
- 2.3.6 Port D (PD7...PD0)
- 2.3.7 Port E (PE7...PE0)
- 2.3.8 Port F (PF7...PF0)
- 2.3.9 Port G (PG5...PG0)
- 2.3.10 Port H (PH7...PH0)
- 2.3.11 Port J (PJ6...PJ0)
- 2.3.12 RESET
- 2.3.13 XTAL1
- 2.3.14 XTAL2
- 2.3.15 AVCC
- 2.3.16 AREF
- 2.3.17 LCDCAP
- 3. Resources
- 4. Data Retention
- 5. About Code Examples
- 6. Capacitive touch sensing
- 7. Register Summary
- 8. Instruction Set Summary
- 9. Ordering Information
- 10. Packaging Information
- 11. Errata
- 12. Datasheet Revision History

35
8284CS–AVR–6/11
ATmega169A/PA/329A/PA/3290A/PA/649A/P/6490A/P
11.9 ATmega3290A/3290PA rev. C
• Interrupts may be lost when writing the timer registers in the asynchronous timer
1. Interrupts may be lost when writing the timer registers in the asynchronous timer
The interrupt will be lost if a timer register that is synchronous timer clock is written when the
asynchronous Timer/Counter register (TCNTx) is 0x00.
Problem Fix/ Workaround
Always check that the asynchronous Timer/Counter register neither have the value 0xFF nor
0x00 before writing to the asynchronous Timer Control Register (TCCRx), asynchronous
Timer Counter Register (TCNTx), or asynchronous Output Compare Register (OCRx).
11.10 ATmega649A/649P/ATmega6490A/6490P
No known errata.