Datasheet

18.4.7 Port C Input Pins Address
Name: PINC
Offset: 0x26
Reset: N/A
Property: When addressing as I/O Register: address offset is 0x06
When addressing I/O registers as data space using LD and ST instructions, the provided offset must be
used. When using the I/O specific commands IN and OUT, the offset is reduced by 0x20, resulting in an
I/O address offset within 0x00 - 0x3F.
Bit 7 6 5 4 3 2 1 0
PINC6 PINC5 PINC4 PINC3 PINC2 PINC1 PINC0
Access
R/W R/W R/W R/W R/W R/W R/W
Reset x x x x x x x
Bits 0, 1, 2, 3, 4, 5, 6 – PINC Port C Input Pins Address
Writing to the pin register provides toggle functionality for I/O. Refer to 18.2.2 Toggling the Pin.
ATmega48PA/88PA/168PA
I/O-Ports
© 2018 Microchip Technology Inc.
Datasheet Complete
DS40002011A-page 132