Datasheet

19
8019KS–AVR–11/10
ATmega165P
9. Datasheet Revision History
Please note that the referring page numbers in this section are referring to this document. The
referring revision in this section are referring to the document revision.
9.1 Rev. K 11/10
9.2 Rev. J 08/10
9.3 Rev. I 08/07
9.4 Rev. H 11/06
9.5 Rev. G 09/06
1. Removed “Not recommended for new designs” from the front page.
2. Updated the last page according to the new Atmel Brand Style Guide.
1. Removed Reference to LCD Controller in Table 8-1 on page 36.
2. Updated “Performing a Page Write” on page 258.
3. Minimum wait delay for tWD_EEPROM, in Table 25-14, “Minimum Wait Delay Before
Writing the Next Flash or EEPROM Location,” on page 281, has been changed to
3.6ms.
4. Updated according to Atmel document standard.
1. Updated “Features” on page 1.
2. Updated bit description in “SREG - AVR Status Register” on page 14.
3. Updated “Starting a Conversion” on page 206.
4. Updated Table 21-6 on page 221.
5. Updated “System and Reset Characteristics” on page 302.
6. Updated representation of bit fields, that is, from WGM13:0 to WGM1[3:0].
1. Updated “Low-frequency Crystal Oscillator” on page 30.
2. Updated Table 26-6 on page 303.
3. Updated note in Table 26-6 on page 303.
1. Updated “Calibrated Internal RC Oscillator” on page 28.
2. Updated “System Control and Reset” on page 43.
3. Updated Table 7-9 on page 31 and Table 7-10 on page 31.