Datasheet

17
2467XS–AVR–06/11
ATmega128
Datasheet
Revision
History
Please note that the referring page numbers in this section are referred to this document. The
referring revision in this section are referring to the document revision.
Rev. 2467X-06/11 1. Corrected typos in “Ordering Information” on page 12.
Rev. 2467W-05/11 1. Added Atmel QTouch Library Support and QTouch Sensing Capability Features.
2. Updated “DC Characteristics” on page 318.
R
RST
maximum value changed from 60kΩ
to 85kΩ.
3. Updated “Ordering Information” on page 12 to include Tape & Reel devices.
Rev. 2467V-02/11 1. Updated the literature number (2467) that accidently changed in rev U.
2. Editing update according to the Atmel new style guide. No more space betweeen the
numbers and their units.
3. Reorganized the swapped chapters in rev U: 8-bit Timer/Counter 0, 16-bit TC1 and
TC3, and 8-bit TC2 with PWM.
Rev. 2467U-08/10 1. Updated “Ordering Information” on page 12. Added Ordering information for Appen-
dix A ATmega128/L 105°C.
Rev. 2467T-07/10 1. Updated the “USARTn Control and Status Register B – UCSRnB” on page 189.
2. Added a link from “Minimizing Power Consumption” on page 47 to “System Clock
and Clock Options” on page 35.
3. Updated use of Technical Terminology in datasheet
4. Corrected formula in Table 133, “Two-wire Serial Bus Requirements,” on page 322
5. Note 6 and Note 7 below Table 133, “Two-wire Serial Bus Requirements,” on page 322
have been removed
Rev. 2467S-07/09 1. Updated the “Errata” on page 15.
2. Updated the TOC with the newest template (version 5.10).
3. Added note “Not recommended from new designs“ from the front page.
4. Added typical I
CC
values for Active and Idle mode in “DC Characteristics” on page
318.
Rev. 2467R-06/08 1. Removed “Not recommended from new designs“ from the front page.