Datasheet

20
8151HS–AVR–02/11
ATmega128A
10. Datasheet Revision History
Please note that the referring page numbers in this section are referred to this document. The
referring revision in this section are referring to the document revision.
10.1 Rev. 8151H – 02/11
10.2 Rev. 8151G – 07/10
10.3 Rev. 8151F – 06/10
10.4 Rev. 8151E – 02/10
10.5 Rev. 8151D – 07/09
1.
Editing update according to the Atmel new style guide. No more space betweeen the numbers
and their units.
2. Updated the last page.
1.
Updated the table note of Table 27-3 on page 324. The test is performed using BODLEVEL=0
and BODLEVEL=1
1. Inserted cross reference in “Minimizing Power Consumption” on page 48
2. Updated Technical Terminology according to Atmel standard
3. Note 6 and Note 7 below “Two-wire Serial Bus Requirements” on page 325 have been removed
4.
The text in “Bit 6 – TXCIEn: TX Complete Interrupt Enable” on page 194 has been corrected by
adding an “n”
1. Updated “Receiving Frames with 9 Data Bits” on page 185. The C code updated.
2. Updated “Packaging Information” on page 373.
3. Updated “Performing Page Erase by SPM” on page 283.
1. Updated “Errata” on page 376.
2. Updated the last page with Atmel’s new addresses.