User manual

8
AVR370
8374A-AVR-04/11
7. Now the AVROSP application can be started to program the kit with the
application. Following command can be used assuming that the kit uses COM6:
avrosp –dATmega128 –cCOM6 –pf –vf -
ifmega_1284p_xplained_example.hex –e
8. Your firmware should now be running
NOTE AVROSP only supports comports COM1 through COM8. Connecting to a higher
comport than this will not work.
5.2 Restoring the bootloader
When the bootloader has been erased it can be restored with any of the previously
mentioned programming tools.
The hex file for the bootloader is a part of the application note zip (in the folder named
hex) file and is called mega_1284p_xplained_bootloader_and_example.hex