User manual

6
AVR370
8374A-AVR-04/11
4.2 Connecting the Atmel AVR JTAGICE mkII
The grey connector on the AVR JTAGICE mkII probe has to be used when
connecting to the Atmel MEGA-1284P Xplained. See Figure 4-2 for reference of how
to make the connection.
Figure 4-2. Connecting AVR JTAGICE mkII to an Xplained board.
4.3 Connecting of the Atmel AVR ONE!
The AVR ONE! JTAG connector can be connected to the MEGA-1284P Xplained kit
with a standoff adapter as shown in Figure 4-3.
Figure 4-3. Connecting AVR ONE! to a Xplained board.