Datasheet

90E36A POLY-PHASE HIGH-PERFORMANCE WIDE-SPAN ENERGY METERING IC
Register 41 April 2, 2013
FuncEn1
Function Enable 1
Address: 04H
Type: Read/Write
Default Value: 0000H
Bit Name Description
15 INOv1En
This bit determines whether to enable the interrupt when the INOv1 bit (b15, SysStatus1) is set.
0: disable (default)
1: enable
14 INOv0En
This bit determines whether to enable the interrupt when the INOv0 bit (b14, SysStatus1) is set.
0: disable (default)
1: enable
13-12 - Reserved.
11 THDUOvEn
This bit determines whether to enable the interrupt when the THDUOv bit (b11, SysStatus1) is set.
0: disable (default)
1: enable
10 THDIOvEn
This bit determines whether to enable the interrupt when the THDIOv bit (b10, SysStatus1) is set.
0: disable (default)
1: enable
9 DFTDone
This bit determines whether to enable the interrupt when the DFTDone bit (b9, SysStatus1) is set.
0: disable (default)
1: enable
8-
Reserved.
7RevQchgTEn
These bits determine whether to enable the corresponding interrupt when any of the direction change bits (b7~b0, SysStatus1) is
set.
0: disable (default)
1: enable
6 RevQchgAEn
5 RevQchgBEn
4RevQchgCEn
3 RevPchgTEn
2 RevPchgAEn
1 RevPchgBEn
0 RevPchgCEn