Manualshelf

Datasheet

ManualsBrandsMICROCHIP TECHNOLOGY ManualsDev KitsPCB design board
401402403404405406407408409410
409
AT32UC3A
– If TDF cycles are programmed, the external bus is marked busy after the rising edge of NRD.
– If TDF optimization is enabled (TDF_MODE =1), TDF wait states are inserted after the setup of NRD.
0: The read operation is controlled by the NCS signal.
– If TDF cycles are programmed, the external bus is marked busy after the rising edge of NCS.
– If TDF optimization is enabled (TDF_MODE =1), TDF wait states are inserted after the setup of NCS.
32058K
AVR32-01/12