Datasheet

125
AT32UC3A
18.8.3 Flash Command Register (FCMD)
Offset: 0x4
The FCMD can not be written if the flash is in the process of performing a flash command.
Doing so will cause the FCR write to be ignored, and the PROGE bit to be set.
CMD: Command
This field defines the flash command. Issuing any unused command will cause the Program-
ming Error flag to be set, and the corresponding interrupt to be requested if the PROGE bit in
FCR is set.
31 30 29 28 27 26 25 24
KEY
23 22 21 20 19 18 17 16
PAGEN [15:8]
15 14 13 12 11 10 9 8
PAGEN [7:0]
7 6 5 4 3 2 1 0
- - CMD
Table 18-5. Set of commands
Command Value Mnemonic
No operation 0 NOP
Write Page 1 WP
Erase Page 2 EP
Clear Page Buffer 3 CPB
Lock region containing given Page 4 LP
Unlock region containing given Page 5 UP
Erase All 6 EA
Write General-Purpose Fuse Bit 7 WGPB
Erase General-Purpose Fuse Bit 8 EGPB
Set Security Bit 9 SSB
Program GP Fuse Byte 10 PGPFB
Erase All GPFuses 11 EAGPF
Quick Page Read 12 QPR
Write User Page 13 WUP
Erase User Page 14 EUP
Quick Page Read User Page 15 QPRUP
32058K
AVR32-01/12