Datasheet

112
AT32UC3A
17.6.3 External Interrupt Test
Name: TEST
Access Type: Read/Write
• NMI
If TEST_EN is 1, the value of this bit will be the value to the interrupt detector and the value on the pad will be ignored.
• INTn
If TEST_EN is 1, the value of this bit will be the value to the interrupt detector and the value on the pad will be ignored.
• TEST_EN
0: External interrupt test is disabled
1: External interrupt test is enabled
31 30 29 28 27 26 25 24
TEST_EN - - - - - - -
23 22 21 20 19 18 17 16
- - - - - - - -
15 14 13 12 11 10 9 8
- - - - - - - NMI
7 6 5 4 3 2 1 0
INT7 INT6 INT5 INT4 INT3 INT2 INT1 INT0
32058K
AVR32-01/12