User manual
Atmel-ICE [USER GUIDE]
42330A-MCU-07/2014
10
Figure 2-10. Atmel-ICE AVR Probe Connection
Figure 2-11. Atmel-ICE SAM Probe Connection
2.7 Opening the Atmel-ICE
Note
For normal operation, the Atmel-ICE unit must not be opened. Opening the unit is done at your
own risk. Anti-static precautions should be taken.
The Atmel-ICE enclosure consists of three separate plastic components - top cover, bottom cover and blue
belt - which are snapped together during assembly. To open the unit, simply insert a large flat screwdriver into
the openings in the blue belt, apply some inward pressure and twist gently. Repeat the process on the other
snapper holes, and the top cover will pop off.