User manual

Atmel-ICE [USER GUIDE]
42330A-MCU-07/2014
27
5.4.2 Atmel-ICE Target Connectors
The Atmel-ICE does not have an active probe. A 50-mil IDC cable is used to connect to the target application
either directly, or through the adapters included in some kits. For more information on the cabling and adapters,
see section Assembling the Atmel-ICE
5.4.3 Atmel-ICE target Connectors Part Numbers
In order to connect the Atmel-ICE 50-mil IDC cable directly to a target board, any standard 50-mil 10-pin
header should suffice. It is advised to use keyed headers to ensure correct orientation when connecting to the
target, such as those used on the adapter board included with the kit.
The part number for this header is: FTSH-105-01-L-DV-K-A-P from SAMTEC.