User manual

Atmel-ICE [USER GUIDE]
42330A-MCU-07/2014
25
5. Hardware Description
5.1 LEDs
The Atmel-ICE top panel has three LEDs which indicate the status of current debug or programming sessions.
Table 5-1. LEDs
LED Function Description
Left Target power GREEN when target power is OK. Flashing indicates a target power
error. Does not light up until a programming/debugging session
connection is started.
Middle Main power RED when main-board power is OK.
Right Status GREEN when the target is running. ORANGE when target is
stopped.
5.2 Rear Panel
The rear panel of the Atmel-ICE houses the micro-B USB connector.
5.3 Bottom Panel
The bottom panel of the Atmel-ICE has a sticker which shows the serial number and date of manufacture.
When seeking technical support, include these details.