Datasheet

97
SAM9X35 [DATASHEET]
11055E–ATARM–10-Mar-2014
13.10.16 AIC Debug Control Register
Name: AIC_DCR
Address: 0xFFFFF138
Access: Read-write
Reset: 0x0
This register can only be written if the WPEN bit is cleared in AIC Write Protect Mode Register
• PROT: Protection Mode
0 = The Protection Mode is disabled.
1 = The Protection Mode is enabled.
• GMSK: General Mask
0 = The nIRQ and nFIQ lines are normally controlled by the AIC.
1 = The nIRQ and nFIQ lines are tied to their inactive state.
31 30 29 28 27 26 25 24
––––––––
23 22 21 20 19 18 17 16
––––––––
15 14 13 12 11 10 9 8
––––––––
76543210
––––––GMSKPROT