Datasheet

825
SAM9X35 [DATASHEET]
11055E–ATARM–10-Mar-2014
39.8.10 USART Interrupt Disable Register (LIN_MODE)
Name: US_IDR (LIN_MODE)
Address: 0xF801C00C (0), 0xF802000C (1), 0xF802400C (2), 0xF802800C (3)
Access: Write-only
This configuration is relevant only if USART_MODE=0xA or 0xB in “USART Mode Register” on page 815.
• RXRDY: RXRDY Interrupt Disable
• TXRDY: TXRDY Interrupt Disable
• OVRE: Overrun Error Interrupt Disable
• FRAME: Framing Error Interrupt Disable
• PARE: Parity Error Interrupt Disable
• TIMEOUT: Time-out Interrupt Disable
• TXEMPTY: TXEMPTY Interrupt Disable
• LINBK: LIN Break Sent or LIN Break Received Interrupt Disable
• LINID: LIN Identifier Sent or LIN Identifier Received Interrupt Disable
• LINTC: LIN Transfer Completed Interrupt Disable
• LINBE: LIN Bus Error Interrupt Disable
• LINISFE: LIN Inconsistent Synch Field Error Interrupt Disable
• LINIPE: LIN Identifier Parity Interrupt Disable
• LINCE: LIN Checksum Error Interrupt Disable
• LINSNRE: LIN Slave Not Responding Error Interrupt Disable
0: No effect
1: Disables the corresponding interrupt.
31 30 29 28 27 26 25 24
– – LINSNRE LINCE LINIPE LINISFE LINBE –
23 22 21 20 19 18 17 16
––––––––
15 14 13 12 11 10 9 8
LINTC LINID LINBK – – – TXEMPTY TIMEOUT
76543210
PARE FRAME OVRE – – – TXRDY RXRDY