Datasheet

822
SAM9X35 [DATASHEET]
11055E–ATARM–10-Mar-2014
39.8.7 USART Interrupt Enable Register (LIN_MODE)
Name: US_IER (LIN_MODE)
Address: 0xF801C008 (0), 0xF8020008 (1), 0xF8024008 (2), 0xF8028008 (3)
Access: Write-only
This configuration is relevant only if USART_MODE=0xA or 0xB in “USART Mode Register” on page 815.
• RXRDY: RXRDY Interrupt Enable
• TXRDY: TXRDY Interrupt Enable
• OVRE: Overrun Error Interrupt Enable
• FRAME: Framing Error Interrupt Enable
• PARE: Parity Error Interrupt Enable
• TIMEOUT: Time-out Interrupt Enable
• TXEMPTY: TXEMPTY Interrupt Enable
• LINBK: LIN Break Sent or LIN Break Received Interrupt Enable
• LINID: LIN Identifier Sent or LIN Identifier Received Interrupt Enable
• LINTC: LIN Transfer Completed Interrupt Enable
• LINBE: LIN Bus Error Interrupt Enable
• LINISFE: LIN Inconsistent Synch Field Error Interrupt Enable
• LINIPE: LIN Identifier Parity Interrupt Enable
• LINCE: LIN Checksum Error Interrupt Enable
• LINSNRE: LIN Slave Not Responding Error Interrupt Enable
0: No effect
1: Enables the corresponding interrupt.
31 30 29 28 27 26 25 24
– – LINSNRE LINCE LINIPE LINISFE LINBE –
23 22 21 20 19 18 17 16
––––––––
15 14 13 12 11 10 9 8
LINTC LINID LINBK – – – TXEMPTY TIMEOUT
76543210
PARE FRAME OVRE – – – TXRDY RXRDY