Datasheet

609
SAM9X35 [DATASHEET]
11055E–ATARM–10-Mar-2014
34.14.6 HSMCI Command Register
Name: HSMCI_CMDR
Address: 0xF0008014 (0), 0xF000C014 (1)
Access: Write-only
This register is write-protected while CMDRDY is 0 in HSMCI_SR. If an Interrupt command is sent, this register is only writable by
an interrupt response (field SPCMD). This means that the current command execution cannot be interrupted or modified.
• CMDNB: Command Number
This is the command index.
• RSPTYP: Response Type
• SPCMD: Special Command
31 30 29 28 27 26 25 24
––––BOOT_ACKATACS IOSPCMD
23 22 21 20 19 18 17 16
– – TRTYP TRDIR TRCMD
15 14 13 12 11 10 9 8
– – – MAXLAT OPDCMD SPCMD
76543210
RSPTYP CMDNB
Value Name Description
0 NORESP No response.
1 48_BIT 48-bit response.
2 136_BIT 136-bit response.
3 R1B R1b response type
Value Name Description
0 STD Not a special CMD.
1INIT
Initialization CMD:
74 clock cycles for initialization sequence.
2 SYNC
Synchronized CMD:
Wait for the end of the current data block transfer before sending the pending command.
3CE_ATA
CE-ATA Completion Signal disable Command.
The host cancels the ability for the device to return a command completion signal on the
command line.
4IT_CMD
Interrupt command:
Corresponds to the Interrupt Mode (CMD40).
5 IT_RESP
Interrupt response:
Corresponds to the Interrupt Mode (CMD40).
6BOR
Boot Operation Request.
Start a boot operation mode, the host processor can read boot data from the MMC device directly.
7EBO
End Boot Operation.
This command allows the host processor to terminate the boot operation mode.