Datasheet

1289
SAM9X35 [DATASHEET]
11055E–ATARM–10-Mar-2014
CAN:
Added information on Write Protected Registers:
- added a line in Section 41.2 “Embedded Characteristics”
- added rows for Write Protect Mode Register (CAN_WPMR) and Write Protect Status Register (CAN_WPSR) in
Table 41-6 “Register Mapping”
- added Section 41.8.5 “Write Protected Registers”, Section 41.9.12 “CAN Write Protection Mode Register” and
Section 41.9.13 “CAN Write Protection Status Register”
-
added a phrase specifying when a register can be written (restricted by CAN Write Protection Mode Register) in:
Section 41.9.1 “CAN Mode Register”
Section 41.9.6 “CAN Baudrate Register”
Section 41.9.14 “CAN Message Mode Register”
Section 41.9.15 “CAN Message Acceptance Mask Register”
Section 41.9.16 “CAN Message ID Register”
Updated offsets for reserved registers in Table 41-6 “Register Mapping”:
- 0x002C - 0x01FC --> 0x002C - 0x00E0
- added a row: - 0x00EC - 0x01FC
Updated the register table and the corresponding bitfield name in:
Section 41.9.7 “CAN Timer Register”
Section 41.9.8 “CAN Timestamp Register”
Section 41.9.14 “CAN Message Mode Register”
Section 41.9.18 “CAN Message Status Register”
Section 41.9.1 “CAN Mode Register”, fixed a typo in “LPM: Disable/Enable Low Power Mode” (‘w’ --> ‘0’).
Section 41.9.14 “CAN Message Mode Register”, updated the bitfield table in “MOT: Mailbox Object Type” .
Section 41.6.1 “I/O Lines”, added Table 41-2 “I/O Lines”.
8215
ADC:
Section 42.8.15 “ADC Compare Window Register”, added two paragraphs about programming LOWTHRES and
HIGHTHRES bitfields depending on the LOWRES bitfield settings (ADC Mode Register).
Increased the size of XPOS/XSCALE/YPOS/YSCALE fields from 10 to 12-bit in Section 42.8.19 “ADC
Touchscreen X Position Register”, Section 42.8.20 “ADC Touchscreen Y Position Register” and Section 42.8.21
“ADC Touchscreen Pressure Register”.
Section 42.6.4 “Conversion Results”, removed “...and EOC bit corresponding to the last converted channel” from
the last phrase of the third paragraph.
Section 42.2 “Embedded Characteristics”, added the value of Conversion Rate in the 2nd line.
8045
8229
8357
8385
Doc. Rev.
11055C Comments
Change
Request
Ref.
(1)