Datasheet

975
SAM9X25 [DATASHEET]
11054E–ATARM–10-Mar-2014
42.7.12 ADC Interrupt Status Register
Name: ADC_ISR
Address: 0xF804C030
Access: Read-only
• EOCx: End of Conversion x
0 = Corresponding analog channel is disabled, or the conversion is not finished. This flag is cleared when reading the correspond-
ing ADC_CDRx registers.
1 = Corresponding analog channel is enabled and conversion is complete.
• DRDY: Data Ready
0 = No data has been converted since the last read of ADC_LCDR.
1 = At least one data has been converted and is available in ADC_LCDR.
• GOVRE: General Overrun Error
0 = No General Overrun Error occurred since the last read of ADC_ISR.
1 = At least one General Overrun Error has occurred since the last read of ADC_ISR.
• COMPE: Comparison Error
0 = No Comparison Error since the last read of ADC_ISR.
1 = At least one Comparison Error (defined in the ADC_EMR and ADC_CWR registers) has occurred since the last read of
ADC_ISR.
31 30 29 28 27 26 25 24
– – COMPE GOVRE DRDY
23 22 21 20 19 18 17 16
– ––––
15 14 13 12 11 10 9 8
––––EOC11EOC10EOC9EOC8
76543210
EOC7 EOC6 EOC5 EOC4 EOC3 EOC2 EOC1 EOC0