Datasheet

857
SAM9X25 [DATASHEET]
11054E–ATARM–10-Mar-2014
39.8.13 USART Interrupt Mask Register (LIN_MODE)
Name: US_IMR (LIN_MODE)
Address: 0xF801C010 (0), 0xF8020010 (1), 0xF8024010 (2), 0xF8028010 (3)
Access: Read-only
This configuration is relevant only if USART_MODE=0xA or 0xB in “USART Mode Register” on page 844.
• RXRDY: RXRDY Interrupt Mask
• TXRDY: TXRDY Interrupt Mask
• OVRE: Overrun Error Interrupt Mask
• FRAME: Framing Error Interrupt Mask
• PARE: Parity Error Interrupt Mask
• TIMEOUT: Time-out Interrupt Mask
• TXEMPTY: TXEMPTY Interrupt Mask
• LINBK: LIN Break Sent or LIN Break Received Interrupt Mask
• LINID: LIN Identifier Sent or LIN Identifier Received Interrupt Mask
• LINTC: LIN Transfer Completed Interrupt Mask
• LINBE: LIN Bus Error Interrupt Mask
• LINISFE: LIN Inconsistent Synch Field Error Interrupt Mask
• LINIPE: LIN Identifier Parity Interrupt Mask
• LINCE: LIN Checksum Error Interrupt Mask
• LINSNRE: LIN Slave Not Responding Error Interrupt Mask
0: The corresponding interrupt is not enabled.
1: The corresponding interrupt is enabled.
31 30 29 28 27 26 25 24
– – LINSNRE LINCE LINIPE LINISFE LINBE –
23 22 21 20 19 18 17 16
––––––––
15 14 13 12 11 10 9 8
LINTC LINID LINBK – – – TXEMPTY TIMEOUT
76543210
PARE FRAME OVRE – – – TXRDY RXRDY