Datasheet

591
SAM9X25 [DATASHEET]
11054E–ATARM–10-Mar-2014
This bit is set by hardware when a transaction error occurs.
– Isochronous IN transaction is missed, the micro has no time to fill the endpoint (underflow).
– Isochronous OUT data is dropped because the bank is busy (overflow).
This bit is reset by UDPHS_EPTRST register EPT_x (reset endpoint) and by UDPHS_EPTCTLDISx (disable endpoint).
• ERR_CRC_NTR: CRC ISO Error/Number of Transaction Error
– CRC ISO Error (for Isochronous OUT endpoints) (Read-only):
This bit is set by hardware if the last received data is corrupted (CRC error on data).
This bit is updated by hardware when new data is received (Received OUT Data bit).
– Number of Transaction Error (for High Bandwidth Isochronous IN endpoints):
This bit is set at the end of a microframe in which at least one data bank has been transmitted, if less than the number of transac-
tions per micro-frame banks (UDPHS_EPTCFGx register NB_TRANS) have been validated for transmission inside this
microframe.
This bit is reset by UDPHS_EPTRST register EPT_x (reset endpoint) and by UDPHS_EPTCTLDISx (disable endpoint).
• ERR_FLUSH: Bank Flush Error
– (for High Bandwidth Isochronous IN endpoints)
This bit is set when flushing unsent banks at the end of a microframe.
This bit is reset by UDPHS_EPTRST register EPT_x (reset endpoint) and by EPT_CTL_DISx (disable endpoint).
• CURBK: Current Bank
– Current Bank:
These bits are set by hardware to indicate the number of the current bank.
Note: The current bank is updated each time the user:
- Sets the TX Packet Ready bit to prepare the next IN transfer and to switch to the next bank.
- Clears the received OUT data bit to access the next bank.
This bit is reset by UDPHS_EPTRST register EPT_x (reset endpoint) and by UDPHS_EPTCTLDISx (disable endpoint).
• BUSY_BANK_STA: Busy Bank Number
These bits are set by hardware to indicate the number of busy banks.
IN endpoint: It indicates the number of busy banks filled by the user, ready for IN transfer.
OUT endpoint: It indicates the number of busy banks filled by OUT transaction from the Host.
• BYTE_COUNT: UDPHS Byte Count
Byte count of a received data packet.
Value Name Description
0 BANK0 Bank 0 (or single bank)
1 BANK1 Bank 1
2 BANK2 Bank 2
Value Name Description
0 1BUSYBANK 1 busy bank
1 2BUSYBANKS 2 busy banks
2 3BUSYBANKS 3 busy banks