Datasheet

921
SAM9M10 [DATASHEET]
6355F–ATARM–12-Mar-13
• EOCXp: End of Conversion X Position
0 = The pressure measurement is disabled or the Xp conversion is not finished.
1 = The pressure measurement is enabled and the Xp conversion is complete
• EOCZ1: End of Conversion Z1 Measure
0 = The pressure measurement is disabled or the Z1 conversion is not finished.
1 = The pressure measurement is enabled and the Z1 conversion is complete
• EOCZ2: End of Conversion Z2 Measure
0 = The pressure measurement is disabled or the Z2 conversion is not finished.
1 = The pressure measurement is enabled and the Z2 conversion is complete
• OVREXP: Overrun Error on X Position
0 = No overrun error on the XP measure channel.
1 = There has been an overrun error on the XP measure channel.
• OVREZ1: Overrun Error on Z1 Measure
0 = No overrun error on the Z1 measure channel.
1 = There has been an overrun error on the Z1 measure channel.
• OVREZ2: Overrun Error on Z2 Measure
0 = No overrun error on the Z2 measure channel.
1 = There has been an overrun error on the Z2 measure channel.