Datasheet

170
SAM9M10 [DATASHEET]
6355FATARM12-Mar-13
20.2.8.2 16-bit LPDDR on EBI
Hardware Configuration
Software Configuration
The following configuration has to be performed:
Assign EBI_CS1 to the DDR2 controller by setting the bit EBI_CS1A in the EBI Chip Select Register located in
the bus matrix memory space.
Initialize the DDR2 Controller depending on the LP-DDR device and system bus frequency.
The LP-DDR initialization sequence is described in the section “Low-power DDR1-SDRAM Initialization” in
“DDR/SDR SDRAM Controller (DDRSDRC)”.