Datasheet

169
SAM9M10 [DATASHEET]
6355FATARM12-Mar-13
20.2.8.1 2x8-bit DDR2 on EBI
Hardware Configuration
Software Configuration
Assign EBI_CS1 to the DDR2 controller by setting the EBI_CS1A bit in the EBI Chip Select Register located in
the bus matrix memory space.
Initialize the DDR2 Controller depending on the DDR2 device and system bus frequency.
The DDR2 initialization sequence is described in the sub-section “DDR2 Device Initialization” of the DDRSDRC
section.
EBI_SDA10
EBI_SDA10