Datasheet

1346
SAM9M10 [DATASHEET]
6355F–ATARM–12-Mar-13
.
Doc. Rev
6355E Comments
Change
Request
Ref.
Errata:
Added Boot errata related to AT45-series SPI DataFlash: Section 50.1.1.2 “Boot ROM: Boot issue on AT45-
series SPI dataflash” and Section 50.2.1.2 “Boot ROM: Boot issue on AT45-series SPI dataflash”
Removed section 50.2.8 ‘USB High Speed Host Port (UHPHS) and Device Port (UDPHS)’: solved in Rev. B
Added Section 50.1.5 “RSTC: Software Reset During DDRAM Accesses” and Section 50.2.5 “RSTC:
Software Reset During DDRAM Accesses”
8080
8112
8111
Doc. Rev
6355D Comments
Change
Request
Ref.
DDRSDRC:
Section 22.8.3 “DDRSDRC Configuration Register”, DQMS bitfield changed to EBISHARE, and its
description changed too.
7899
Electrical Characteristics
Table 47-14 “PLLA Characteristics” , Current Consumption values in active mode updated.
Table 47-44 “RMII Mode” , EMAC 21 Max value changed from 17.8 to 16.
7763
7981
Errata:
Marking section moved from Errata section to Section 48. “SAM9M10 Mechanical Characteristics”
Section 50.2 “SAM9M10 Errata - Rev. B Parts” added, similar to Rev. A Parts, but without
UHPHS:
Packet Loss Issue in the UTMI Transceivers .
Second sentence edited in “UHPHS/UDPHS: USB does not start after power-up” (Section 50.1.10.1 and
Section 50.2.9.1 ).
EMAC errata added to Errata MRL A and B, as Section 50.1.2 “EMAC” and Section 50.2.2 “EMAC”.
7979
7981
Ordering Information:
Section 49. “SAM9M10 Ordering Information”, a second ordering code added: AT91SAM9M10B-C. An
MRL column added too.
7979