Datasheet

1345
SAM9M10 [DATASHEET]
6355F–ATARM–12-Mar-13
Revision History
In the tables that follow, the most recent version appears first. The initials “rfo” indicate changes requested by prod-
uct experts, or made during proof reading as part of the approval process.
Doc. Rev
6355F Comments
Change
Request
Ref.
Ordering Codes:
Table 49-1, “SAM9M10 Ordering Information”, added AT91SAM9M10C-CU and MRL C 8551
Product Overview:
Table 3-1 “Signal Description List” , added open drain comment to NRST line.
Section 1. “Features”, under “Peripherals” , added DBGU to USART...
AT91 removed from SAM9M10 product name in headers, text and images.
8350
rfo
rfo
Errata:
Section 50.3 “SAM9M10 Errata - Rev. C Parts”, added to datasheet.
Section 50.2 “SAM9M10 Errata - Rev. B Parts”, added missing errata as stated below:
Section 50.2.9 “USB High Speed Host Port (UHPHS) and Device Port (UDPHS)”
, Section 50.2.9 “USB High
Speed Host Port (UHPHS) and Device Port (UDPHS)”
Rev. B Errata, lost in publishing error in version 6355E.
8551
rfo
8372
EBI:
Table 20-5 “EBI Pins and External Device Connections” , in the DDR2/LPDDR column, addded A10 to
SDA10 row.
Section 20.2.8.1 “2x8-bit DDR2 on EBI”, updated the hardware configuration schema.
8254
ISI:
Section 39.5.1 “ISI Configuration 1 Register”, restored value 0 line to FULL bitfield description.
rfo
MATRIX:
Section 19.7.6 “Chip Configuration User Interface” and Section 19.7.6.3 “EBI Chip Select Assignment
Register”, CCFG_EBICSA reset value is 0x00070000
8007
RTC:
Section 14.5 “Functional Description”, hardware reset changed to general reset.
7893
SHDWC:
Section 17.3 “Block Diagram”, removed redundant block diagram formerly shown in Figure 17-1. 8453
USART:
Section 31.7.7.2 “Baud Rate”, changed the minimum CD value for SPI master mode from 4 to 6. 8344
Electrical Characteristics:
Section 47.12.2 “Power-Up Sequence”, added a phrase in conclusion.
8338